Danger zone at the line
A worker steps over the railing next to the running slitting line. The camera sees a person inside the hazard zone, the line gets a stop signal, the siren sounds and the shift lead gets a message.
Every use case for the plant
Pick a task or scroll through. Everything runs on the cameras already in the shop: over the coil store, the slitting line, the roll-forming lines and the aisles. 4safe sees the danger and acts in seconds: it stops the line, sounds the siren and messages the shift lead.
Safety on the lines
Hands in a running machine
A worker reaches between the rolls while the line runs. The AI agent sends the stop signal at once, sounds the siren and posts to the messenger.
PPE check
A worker feeds the strip by hand without a hard hat, gloves or glasses. The system flags the missing gear and notifies the shift lead.
Crane load overhead
A worker walks under a coil hanging on the crane hook. The camera sees the person under the load and the crane operator and shift lead are alerted right away.
Floor and aisles
Unattended running line
A line runs with no operator next to it. The shift lead gets an alert before a jam or a batch of defects goes unnoticed.
Fall detection
A person falls in the aisle and no one calls for help. The model reads the fall from body position and alerts the shift lead right away.
Foreign object
A tool or a sharp offcut is left on the floor between the stacks. The object is flagged red and the shift lead gets a message, so it is removed before someone trips over it.
Blocked walkway
A loaded pallet jack is left in the marked walkway. The system sees the blocked route and asks the shift lead to clear it.
Want to see it on your own cameras?